Location :  Home  >  Products  > Detailed Information : To Sell Firming Agent169(picture)

To Sell Firming Agent169(picture)

【Feature】

The product is modified epoxy glue with features of strong adhesive strength, low stress, low contractibility, no bubble, quick set, proper viscosity and easy operate, resistant of grind, aging, cold-hot exchange.

【Scope Of Application】

Widely used to combine and bond of the marble-marble, marble-granite, marble-pottery, stone-concrete.

【Technical Parameter】

【Solidify Time】

Remark: Glue quantity for usable time is 100g

【Using Method】

1.       Polish the stone plate to a certain thick and flat. Remove dirt, sand, oil and keep clear, dry.

2.       Mix the glue of part A and B at rate of 2:1 evenly. Spread the glue to basic plate and scrape. Press the plate to combine and exclude out the air between the plates. Make sure the glue fill adequately the stone plates and make proper glue liquid overflowed when pressed.

3.       Put the stone in order and wait for solidify of glue.  Use clamp or jack to press the surface.

4.       Reduce pressure after 2-3 hours for solidifying at normal temperature. 24 hours later, can go on next procedure. In cold winter, heat the plate at 50-60℃ for 2-3 hours, go on work after natural cooling to room temperature.

5.       The reference glue quantity is 400-600g/m².  Could spread glue on one side or two sides.

6.       Add different color paste and paint to make the glue the same color as the stone. The qty of color paste is 1-2% of glue, paint is 10-20% of glue.